Select your monitoring needs and we’ll recommend the ideal solution.
Vibrating wire 5-channelLS-G6-VW
The 5-channel data data logger may be used for scenarios in which one borehole contains multiple sensors such as piezometers or multipoint borehole extensometers. It is also ideal for groups of sensors like strain gauges and load cells with 3 to 5 sensors.
Vibrating wire 1-channel aluminum versionLS-G6-VW-1M
The aluminum alloy box version is offered with an external antenna which improves the range for long distance applications such as strain gauges or pore water pressure monitoring.
Vibrating wire 1-channel polycarbonate versionLS-G6-VW-1P
The polycarbonate box version may be used for city installations since the internal antenna is protected from vandalism and can be integrated into walls. It is also ideal for saline atmospheres and other corrosive environments (mines, seaports).
The Piconode is a small but reliable and robust data logger that can be discreetly installed at work sites. It is able to read sensors for monitoring ground anchors, cracks, pressure and temperature, among others.
The Analog 4-channel admits most inputs from analog sensors, such as voltage, 4-20mA, potentiometer, FWB, thermistor or PT100, allowing it to digitize load cells, strain gauges and pressure cells.
The digital logger brings the advantages of electronics to the geotechnical world. It can easily connect a wireless network of in-place inclinometres (IPIs) on a chain in a hole or excavation, multipoint borehole extensometers (MPBX) and other sensors from leading manufacturers.
Laser distance meterLS-G6-LASER
The Laser can be used to measure changes in the distance between walls, tunnel convergence, bearing and joint movements in bridges, lifting and placement of structures and movements of historical buildings. It can also be used to monitor slope movements and for fracture and faults surveillance.
Tiltmeter with external antennaLS-G6-INC15
The Loadsensing wireless tiltmeter has an extremely accurate dual axis sensor and a version with an external antenna for full range capabilities.
Tiltmeter with internal antennaLS-G6-INC15-I
This tiltmeter is ideal for applications such as railway tracks where it's important to minimize the risk of damaging the device antenna.
4G rugged gateway – edgeLS-G6-KIO GW
The gateway is compatible with CMT Edge and all Loadsensing Edge devices.
4G rugged gateway – cloudLS-M6-KIO GW
The gateway is compatible with CMT Cloud and all Loadsensing Edge devices
The Loadsensing edge devices may be connected to a mobile phone with the app to facilitate quick and easy device configuration without the need for a laptop onsite.
CMT Cloud is part of the Loadsensing connectivity portfolio.
The CMT Edge is part of the Loadsensing connectivity portfolio.
Have you successfully tested another sensor with Loadsensing?