Select your monitoring needs and we’ll recommend the ideal solution. You may also click below to send us your feedback.
Vibrating wire 5-channelLS-G6-VW
The 5-channel data logger may be used for scenarios in which one borehole contains multiple sensors such as piezometers or multipoint borehole extensometers. It is also ideal for groups of sensors like strain gauges and load cells with 3 to 5 sensors.
Vibrating wire 1-channel aluminum versionLS-G6-VW-1M
The aluminum alloy box version is offered with an external antenna which improves the range for long distance applications such as strain gauges or pore water pressure monitoring.
The Piconode is a small but reliable and robust data logger that can be discreetly installed at work sites. It is able to read sensors for monitoring ground anchors, cracks, pressure and temperature, among others.
The Analog 4-channel admits most inputs from analog sensors, such as voltage, 4-20mA, potentiometer, FWB, thermistor or PT100, allowing it to digitize load cells, strain gauges and pressure cells.
The digital logger brings the advantages of electronics to the geotechnical world. It can easily connect a wireless network of in-place inclinometres (IPIs) on a chain in a hole or excavation, multipoint borehole extensometers (MPBX) and other sensors from leading manufacturers.
The LaserTilt90 can be used to measure and monitor settlement from a reference point or to infer vertical settlement at the tunnel crown, tunnel and mining convergence, bearing and expansion joint movements, displacement in structures and buildings, deformations in underground excavations, slope movements, fracture and faults surveillance.
The Tilt90-x may be used to monitor bridge and other critical infrastructure, embankments, building response to tunneling and excavation-induced ground movements, foundations and deep excavations, landslide-prone areas and slope stability.
The Tilt90-i is ideal for applications such as railway tracks where it's important to minimize the risk of damaging the device antenna.
Tiltmeter with internal antennaLS-G6-INC15-I
This tiltmeter is ideal for applications such as railway tracks where it's important to minimize the risk of damaging the device antenna.
Recommended for the New Tilt90 tiltmeters and LaserTilt90. The Worldsensing app facilitates quick and easy device configuration without the need for a laptop onsite. Leverage new stand-alone configuration options.
Recommended for the digital loggers. The Dlog facilitates quick and easy device configuration without the need for a laptop onsite.
4G rugged gateway – edgeLS-G6-KIO GW
The gateway is compatible with CMT Edge and all Loadsensing edge devices.
4G rugged gateway – cloudLS-M6-KIO GW
The gateway is compatible with CMT Cloud and all Loadsensing Edge devices
CMT Cloud is part of the Loadsensing connectivity portfolio.
The CMT Edge is part of the Loadsensing connectivity portfolio.
Send us your feedback.
Have you successfully tested another sensor with Loadsensing?