Although remote sensing techniques (TLS, DPS) are useful for monitoring wide areas with diffuse hazard, the deployment of sensors in contact with the ground (slopes, cliffs, rock blocks) is mandatory when a focused mechanism is underway. So far, most of the so-called ‘geotechnical sensors’ (tiltmeters, jointmeters, stress sensors), and some surveying systems or accessories (like prisms, targets, GNSS receivers), must be installed manually on the landslide body.

Furthermore, in some cases cables for the power supply and data collection are needed. Besides the technical difficulties, in some scenarios this installation phase may imply a high risk for the operators. To overcome this issue, in the contribution we present some test carried out with wireless sensors installed by means of Uncrewed Aerial Vehicle (UAV).

Concretely, we deployed several wireless precision tiltmeters, able to acquire several measures per minute, and with LOng-RAnge communication capability. The experiments were developed in the frame of a risk mitigation project leaded by the ICGC in the Montserrat massif (near Barcelona, Spain), an area of paramount geomechanical and societal interest. There, the targeted instability mechanisms are medium and large rockfalls.

The preliminary tests show that the installation of sensors with UAV can be of great help in the aforementioned situations. The UAV-enabled deployment method should be considered to speed up the availability of real time monitoring data.